CFM-DE-06 Fire suppression systems do not function or are inadequate – design fault

Caused by: Fire suppression system design cannot easily extinguish a vertical fire. [More...]

CFM-DE-33 Fire suppression systems design, configuration and installation outsourced to third party – provided to operator without specification or OEM oversight.

After build fitting of a fire suppression system does not adequately address the fire risk. [More...]

CFM-DE-34 Fire suppression system specification, design, install, test and maintenance involves multiple organisations

Specification may be from OEM or operator. [More...]

CFM-DT-10 Detection and/or suppression system compromised – no signal on fire or potential fire situation

Failure to detect and/or respond to a heating/fire situation [More...]

CFM-LR-12 Fire suppression activated but does not extinguish or prevent a mobile equipment fire

Deployed fire suppression/response is not adequate. [More...]

CFM-MN-11 Equipment returned to service without required checks and sign off

Caused by poor quality control: inadequate inspection before returning. [More...]

CFM-OP-06 Fire suppression systems does not function or is inadequate – during operations

Failure of the reticulated fire suppression system to work, caused by several factors. [More...]